MST Intake / Inlet BMW M2 Competition M3 M4 S55 3.0 F80 F83 F87 (BW-M3401/02)
Price:
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
MST performance
BMW M2 Competition / M3 / M4 Intake + Inlet S55 3.0 (BW-M3401+02)
We also did the dyno test, the maximum increase is 10-13 hp, the throttle response is better than the original air intake
and there are more exciting sounds. After installation, it can be updated to the original energy programming or to level 1-3 programming.
Characteristics
- Maximizes airflow to 10-12 HP!
- High-quality laser-cut heat shield blocks the hot engine air
- Better throttle response and more exciting sounds
- Can be updated to the original energy programming or level 1-3 programming
- The engine air filter should be cleaned after approximately 20,000 km and replaced after approximately 60,000 km
- Without papers / No registration in the STVZO / Motorsport articles
Suitable for:
BMW S55 3.0 engine M2 / M3 / M4