ASR FLAP CONTROL CB2 CUPRA FORMENTOR VZ5 - GEN2
Price:
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
ASR CUPRA FORMENTOR VZ5 - FLAP CONTROL CB2 - GEN2
Valve control CB2 GEN 2 for controlling the exhaust flaps via the driving profiles and set button in the Cupra Formentor VZ5
Additional functions:
- Gearbox S detection
- SSA Memory
Flap control CB2-GEN2 for controlling the exhaust flaps via the driving profiles and the set button including SSA memory
With this control unit you have the possibility to control your exhaust flaps via the driving profiles and the set button.
Functions at a glance:
Driving profiles:
- Cupra / Sport: flaps permanently open
- Comfort: Open from 3500rpm / 80% accelerator (shortly before kickdown)
- Offroad / Eco: Open from 4500 rpm / 80% accelerator (just before kickdown)
Easy Switch (double-click Set or ESC key):
By double-clicking the Set or ESC key, the flaps can be opened and closed independently of the driving profile. Automatic opening at 4500 rpm is always maintained.
Series mode / workshop mode:
The module is activated or deactivated using a key combination. When the module is deactivated, everything behaves as if no module were installed.
Gearbox S detection:
As soon as you put the transmission into S, both flaps open.
SSA Memory (Available from GEN2):
The automatic start-stop setting is saved and restored after the vehicle is started.
Assembly
Installation is plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).
Additional features
- Can be retrofitted at any time without leaving any traces
- No error message
- This device has been specially developed for use on electrical flap systems and therefore offers safe and long-lasting operation.
Rely on our quality!
Brand product Made in Germany!
Notes:
- No approval in the StVO
- For racing use only
- When driving at full load, the flaps should not be completely closed
- Installation at your own risk
- If the instructions are disregarded, no liability is assumed for any damage caused