ASR flap control RX1 Audi TTRS 8S
Price:
Couldn't load pickup availability
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *
ADR flap control RX1
Flap control with vehicle-specific cable set (type AE2 8S)
Suitable for: Audi TTRS 8S
- Control via handheld transmitter
- Plug & Play installation in the footwell
- Not approved under German road traffic regulations. For racing, show, or export use only.
Advantages compared to competing products
- Control independent of Drive Select
- You decide on the vehicle sound and not the selected driving profile
- Correct series mode (module deactivated) even after vehicle start
- Important for visits to the workshop, service or MOT.
- Freely programmable start mode
- You decide about the sound when starting the vehicle
- No interference with the CAN bus
- No danger to other control units
- No influence of software updates on the function of our control system
- Plug and Play with original connectors
- No damage to the original cables, no use of power thieves
Start mode
The start mode defines the mode the device should use after the ignition is turned on. By default, the device saves the last selected mode and restores it when the vehicle is started. If you prefer a specific mode when starting, regardless of how you parked your vehicle, this can be programmed.
The start mode can be freely programmed as desired
Last state: Press the “Sport Mode” button 5 times within 5 seconds.
Other modes: Press the button for the mode you want to learn as the start mode for about 10 seconds.
The flaps open and close 5 times to confirm successful programming of the start mode.
Assembly
Installation is plug & play. The device has vehicle-specific connectors that simply plug into the existing diverter valve.
Additional features
- Can be retrofitted at any time without leaving any traces
- Standalone system without interference with the CAN bus
- No error message
Handheld transmitter
- High-quality and elegant appearance
- brushed stainless steel front
- High range
Notes
- No approval in the StVO
- For racing use only
- When driving at full load, the flaps should not be completely closed
- Installation at your own risk
- If the instructions are disregarded, no liability is assumed for any damage caused