ASR flap control RX2 Audi S3 8V pre-facelift

By ASR

Price:

Regular price 398,00 €
Tax included Shipping calculated at checkout.
SKU: ASR-105931
Legal Notice

It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *

Legal Notice

It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *

information on product safety

Manufacturer/EU Responsible Person

Company name
ASR Component GmbH

address
Bövingen 108, Much, 53804, DE

e-mail
info@asr-component.de

ASR Audi S3 [8V pre-facelift] flap control RX2

  • Control via SSA button
  • SSA memory
  • Plug & Play installation in the footwell and center console
  • Not approved under German road traffic regulations. For racing, show, or export use only.

With our flap control for your Audi S3 [8V Facelift] you have the option of switching the exhaust flaps manually.
It's controlled using the SSA button or, alternatively, our classic handheld transmitter. This gives you complete control over your vehicle's sound!

Once installed, you can control the exhaust flaps and the start/stop function using the start/stop button. The module also features an SSA memory and restores the start/stop state when the vehicle is started.

Features and benefits
Control via start-stop button
SSA Hold the start-stop button for 5 seconds
By holding the SSA button, you can switch between the control of the flaps and the standard automatic start-stop system.

SSA
1x click on start-stop button
Clicking the SSA button controls the flaps or the automatic start-stop system (depending on the activated mode).

1 Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.

2 series mode
The factory controls are restored.

3 Comfort Mode
The exhaust flaps are closed, thus reducing the noise level.

Control independent of the driving profile
You decide on the vehicle sound, not the selected driving profile

Correct series mode
Important for visits to the workshop

Can be activated via the SSA button

Freely programmable start mode
You decide about the sound when starting the vehicle

No interference with the CAN bus
No danger to other control devices

No influence of software updates on the control system

  • Plug & Play with original plugs
  • No damage to the original cables, no use of power thieves
  • Can be retrofitted at any time without leaving any traces
  • Handheld transmitter
  • High-quality with brushed stainless steel front
  • High range

Notes:

  • No approval in the StVO
  • For racing use only
  • When driving at full load, the flaps should not be completely closed
  • Installation at your own risk
  • If the instructions are disregarded, no liability is assumed for any damage caused