ASR FLAP CONTROL RX2 (ML2) MERCEDES AMG GT 63, 53, 43, AMG GT 63 S, GT 63 SE Performance (4 doors

By ASR

Price:

Sale price 369,00 € Regular price 389,00 €
Tax included Shipping calculated at checkout.
SKU: ASR-101533
Legal Notice

It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *

Legal Notice

It is expressly stated that the parts or equipment offered here are manufactured exclusively for racing vehicles. There is no road approval, authorization or authority within the meaning of Article 55 of Regulation (EU) 2018/858, to whose provisions reference is made. Parts or equipment as defined in Annex VI to Regulation (EU) 2018/858, which are used both in racing and on the road, may only be placed on the market for vehicles intended for use on public roads if they meet the requirements set out in the delegated acts referred to in paragraph 3 of this article and have been authorized by the Commission. Parts or equipment that may pose a serious risk to the proper functioning of systems that are essential to the safety of the vehicle or to its environmental compatibility may not be placed on the market or put into service. By confirming, you expressly declare that you have taken note of these instructions, restrictions and prohibitions. Upon receipt of the parts or equipment, you assume full liability. *

information on product safety

Manufacturer/EU Responsible Person

Company name
ASR Component GmbH

address
Bövingen 108, Much, 53804, DE

e-mail
info@asr-component.de

ASR FLAP CONTROL RX2 (ML2)

Control for Mercedes vehicles with two electric exhaust flaps

  • Mercedes AMG GT 63, 53, 43, AMG GT 63 S, GT 63 SE Performance (4 doors)

This control unit allows you to manually operate your exhaust flaps. It is controlled using a handheld transmitter.

This gives you full control over your vehicle sound!

The module is plugged directly into the actuators of the exhaust flaps in the rear silencer area.


Advantages compared to competing products

  • Control independent of Drive Select
  • You decide on the vehicle sound and not the selected driving profile
  • Correct series mode (module deactivated) even after vehicle start
  • Important for visits to the workshop, service or MOT.
  • Workshop mode
  • Module can be completely deactivated
  • Freely programmable start mode
  • You decide about the sound when starting the vehicle
  • Plug and Play with original connectors
  • No damage to the original cables, no use of power thieves

Start mode:

The start mode describes in which mode the device should start after the ignition is switched on.

In the standard configuration, the device saves the last set mode and restores it when the vehicle is started.

If you want a specific mode when starting, regardless of how you parked your vehicle, this can be programmed.

The start mode can be freely programmed as desired:

  1. Last state: Press the “Sport Mode” button 5 times within 5 seconds.
  2. Other modes: Press the button for the mode you want to learn as the start mode for about 10 seconds.
  3. The flaps open and close 5 times to confirm successful programming of the start mode.

Assembly:

  • Installation is plug-and-play. The device features vehicle-specific connectors that can be mounted directly on the exhaust flaps.
  • We recommend mounting it in the trunk for optimal reception and to protect it from the elements. The cables are designed for this length.

Additional features

  • Can be retrofitted at any time without leaving any traces.
  • Standalone system without interference with the CAN bus
  • No error message

Handheld transmitter

  • High-quality and elegant appearance
  • brushed stainless steel front
  • High range

This device has been specially developed for use on electrical flap systems and therefore offers safe and long-lasting operation.

Notes:

  • No approval in the StVO
  • For racing use only
  • When driving at full load, the flaps should not be completely closed
  • Installation at your own risk
  • If the instructions are disregarded, no liability is assumed for any damage caused